CO2-H-IN-CHAMBER-SENSOR
In chamber CO2 and Humidity sensor:
By bringing feedback inside the chamber, the BL3 ‘sees’ what no other live cell chamber today can, ensuring accurate and stable conditions right from the start of your experiment, right where your experiment is happening.
- It provides feedback from the inside of the Okolab BL3 chambers.
- The sensor can be easily added to compatible chambers at any time.
- Sensors lifetime 5 years.
documentation
Why the OKOLAB FULL SAMPLE FEEDBACK TECHNOLOGY Matters:
Traditional incubation systems with digital CO2 mixers sample CO2 concentration at the source, the mixer itself, where it is later routed to the live cell chamber. In theory, this should produce an environment within the chamber that matches the defined CO2 setpoint of the mixer; in reality, this is not always the case.
Some common causes for this, observed multiple times in the field, are the following:
- an improperly secured lid on the microenvironment chamber
- loose connections or kinks in air tubing downstream from the mixer
- improper placement of sample or gaps between the sample carrier (dish, slide, etc) and the microenvironment chamber sample insert
- leaving a position on a multi-sample insert open to ambient air