UNO-PLUS-T-H-CO2

It includes:

All-in-one T/H UNO-PLUS controller with embedded 7.3″ touch screen display, for use with both 100% CO2 or premixed Air+5%CO2. Compatible with Okolab Objective Heaters and UNO-PLUS incubating chambers.

Technical Specs

• The thermal controller allows to work both in chamber and in specimen feedback mode. T range: 3°C above ambient – 60°C.
• Temperature accuracy is ± 0.1°C in specimen feedback mode and ± 0.3°C in chamber feedback mode, if room temperature remains within ± 1°C.
• The controller is compatible with OBJ-COLLAR series – recommended for immersion objectives. Collars connect directly to the controller and are calibrated with automatic routines.
• Open-loop digital CO2 mixer with 0.1% Resolution and ± 0.2% Accuracy.
• CO2 range 0-20%.
• An internal air pump allows to use background air to create Air/CO2 mixtures. A separate tubing kit is also included in case a premixed gas source is used instead of pure CO₂.
• Open-loop digital Humidity module.
• Humidity range at 37°C: 51 to 90%.
• Humidity Set-point Resolution: 1%.
• It features a temperature controlled tube to deliver the humidified gas to the incubating chamber.