H301-PRIOR-NZ500
Stage compatibility: fits on Prior NZ500 piezo Z-stages
The chamber can fit:
- 35/60 mm Petri
- 1x3 in. / 1x2 in. chambered slides
- 6-12-24-48-96 MW plates
- Uniformly heated by means of embedded electric resistances and is covered with a temperature controlled conductive glass lid
- Magnets allow easy interchange chamber insert
- Magnetic locks hold Petri, Slides in correct position inside the chamber
- Perfusion holes: channels for 2.5 mm O.D. tubings are available in chamber riser
- Removable riser to fit standard multiwell plates or to perform perfusion
Available Inserts
| 6MW-PRIOR-N500 | 6 well plates |   |
| 12MW-PRIOR-N500 | 12 well plates |  |
| 24MW-PRIOR-N500 | 24 well plates |  |
| 24MW-NUNC-PRIOR-N500 | 24-well NUNC/GREINER plates |  |
| 48MW-PRIOR-N500 | 48-well plates |  |
| 96MW-PRIOR-N500 | 96-well plates. |  |
| MW-OIL-N500 | Open frame to image multi well plates with oil immersion objectives |  |
| 1x35-PRIOR-N500 | #1 35mm Petri-dish |  |
| 1xGS-PRIOR-N500 | #1 1x3in. chamberslide |  |
| 1xLABTEK-PRIOR-N500 | #1 Lab-Tek 1x2 in. chambered cover glass |  |
| 1xLABTEK-II-PRIOR-N500 | #1 Lab-Tek II 1x2 in. chambered cover glass |  |
| 1x60-PRIOR-N500 | #1 60mm Petri-dish |  |
| 1xT25-PRIOR-N500 | #1 Nunc and Greiner T25 flask |  |
| 2x35-PRIOR-N500 | #2 35mm Petri-dish |  |
| 2xGS-PRIOR-N500 | #2 1x3in. chamberslides |  |
| 2xLABTEK-PRIOR-N500 | #2 Lab-Tek 1x2 in. chambered cover glass |  |
| 2xLABTEK-II-PRIOR-N500 | #2 Lab-Tek II 1x2 in. chambered cover glass |  |
| 2x60-PRIOR-N500 | #2 60mm Petri-dish |  |
| 4x35-PRIOR-N500 | #4 35mm Petri-dish |  |
| GS35-PRIOR-N500 | #1 1x3in. chamberslide and #2 35mm Petri-dish |  |
| LABTEK-35-PRIOR-N500 | #1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish |  |
| LABTEK-II-35-PRIOR-N500 | #1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish |  |
| LABTEK-60-PRIOR-N500 | #1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish |  |
| LABTEK-II-60-PRIOR-N500 | #1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish |  |
| GS60-PRIOR-N500 | #1 1x3in. chamberslide and #1 60mm Petri-dish |  |
| 6035-PRIOR-N500 | #1 60mm Petri-dish and #1 35mm Petri-dish |  |
Available LIDs
| H301-KOEHLER LID | Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm |  |
Mobile: +1 (650) 410 0756