H301-LLSM-SS316
Especially developed by Okolab for all users of Lattice Light Sheet Systems.
Chamber’s base made by stainless steel type AISI 316.
Features:
- Compatible with Lattice Light Sheet Systems
- Operated by Okolab BOLD LINE temperature/gas/humidity controllers
- Chamber’s base made by stainless steel type AISI 316
- Cells are mounted on a standard, horizontally-oriented 5mm round coverslip
- Uniformly heated by means of embedded electric resistances
- Collars for objectives in use, included
- Supporting brackets included
- To control the humidity into the chamber humidity module is recommended: HM-ACTIVE
![H301-LLSM-SS316_480x320.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-LLSM-SS316/H301-LLSM-SS316_480x320.jpg)
![H301-LLSM-SS316_BASE-AND-LID_420X280.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-LLSM-SS316/H301-LLSM-SS316_BASE-AND-LID_420X280.jpg)
Koehler illumination ?
Remove the chamber riser and use the Koehler Lid
![H301-LLSM-SS316_BASE-AND-LID-DOWN_420X280.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-LLSM-SS316/H301-LLSM-SS316_BASE-AND-LID-DOWN_420X280.jpg)
Perfusion ?
Each chamber features up to 12 holes for inlet and outler of perfusion tubings
![H301-LLSM-SS316_collars-for-objectives_420X280.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-LLSM-SS316/H301-LLSM-SS316_collars-for-objectives_420X280.jpg)
Different sample holder ?
Change the chamber insert. It is a 5 seconds task with the magnetic sample holders
Keep the sample in the correct position by using the Magnetic Locks