H303-T-H-CO2/O2 [0-95]

Bold Line 3 – Temperature, Humidity and CO2/O2 controller.

The bundle includes:

• temperature controller for BL3 electric chambers
• CO2 and O2 module
• active humidity
• air pump
• user touch screen interface

The temperature module:

• Allows to work in chamber or in specimen feedback mode and to continuously monitor room temperature.
• T range: 3°C above ambient – 60°C.
• Specimen Temperature accuracy: ± 0.1°C in specimen feedback mode, ± 0.3°C in chamber feedback mode, if room temperature remains within ± 1°C.
• Automatic self-calibration routines for the incubating chamber and for the objective heater.

The CO2 and O2 module:

• CO₂ and O₂ concentrations are digitally controlled by mixing N₂, O₂ and CO₂ through precision mass flow controllers.
• CO₂ range: 0–20%
• O₂ range: 0–95%
• Total output flow rate is variable in the range: 0.2 – 0.4 l/min.

The Active Humidity Controller:

• Humidity sensor to control gas relative humidity.
• Operating thermal range: 25÷50°C.
• Humidity range depends on working temperature. At 37°C humidity can be regulated in the range 50 to 95%.
• Humidity Set-point Resolution: 1%.
• It features a temperature controlled tube to deliver the humidified gas to the incubating chamber.

Integrated into LASX 2.0, NIS-Elements, MetaMorph and MicroManager Imaging Software and capable to receive TTL input. Macro for ZEN Black software available.

Compatible with the CO2-H-IN-CHAMBER SENSOR for in chamber closed loop control on CO2 and Humidity.