H301-LLSM-3i-V2

Especially developed by Okolab for all users of 3i LLSM V2.
Chamber’s base made by stainless steel type AISI 316.
 
Features:
  • Compatible with 3i LLSM V2
  • Operated by Okolab BOLD LINE temperature/gas/humidity controllers
  • Chamber’s base made by stainless steel type AISI 316
  • Cells are mounted on a standard, horizontally-oriented 5mm round coverslip
  • Uniformly heated by means of embedded electric resistances
  • Collars for objectives in use, included
  • Supporting brackets included
  • To control the humidity into the chamber humidity module is recommended: HM-ACTIVE
H301-LLSM-3I-V2_480X320.jpg
H301-LLSM-3i-V2
H301-LLSM-3I-V2_420X280.jpg
H301-LLSM-3i-V2

Koehler illumination ?

Remove the chamber riser and use the Koehler Lid

H301-LLSM-3I-V2_components_420X280.jpg
H301-LLSM-3i-V2 base and lid

Perfusion ?

Each chamber features up to 12 holes for inlet and outler of perfusion tubings

H301-LLSM-3I-V2_collars-for-objectives_420X280.jpg
H301-LLSM-3i-V2 and collars for objectives

Different sample holder ?

Change the chamber insert. It is a 5 seconds task with the magnetic sample holders

Keep the sample in the correct position by using the Magnetic Locks

 

 

 
 
 

© Okolab Srl